_edited.jpg)
_mp4.jpg)
Poly-Tuff Systems International Waterproofing Systems Division
Enviro-friendly Water Curable Coatings and Waterproofing Systems
Poly-Tuff Systems International Waterproofing Systems Division
Enviro-friendly Water Curable Coatings and Waterproofing Systems
The Splatter Coat traffic membrane system consists of a two-component, fast-setting, rapid-curing, solvent-free urethane-elastomer basecoat. It can be applied to green concrete at any thickness without gassing.Â
Â
The topcoat consists of a very strong two-component epoxy with the slip-resistant aggregate mixed right in. The topcoat is spray-applied in a uniform splatter and cures within hours. Apply it one day and drive on it the next day. It's ideal for both new construction and re-coat applications.Â
 Typical Uses :
 Interior Parking Garages       Vehicular Traffic Decks
 Heavy Traffic Decks               Mechanical Rooms
 Concrete Roof Decks           Over Occupied Space
 Low V.O.C. :
Low Oder & Low Volatile Organic Compound (V.O.C.) Products Meeting Stringent Regulations.Â
Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.
 Single Day Install :
Water-Catalyzed Membranes with PATENTED TDI-FREE Technology. Self Leveling Base Membranes.Â
Poly-Tuff 'Splatter Coat' Traffic Membrane System ®
Typical Uses :
- Interior Parking Garages
- Vehicular Traffic Decks
- Heavy Traffic Decks
- Mechanical Rooms
- Concrete Roof Decks
The Splatter Coat traffic membrane system is fast becoming the new standard for traffic membrane systems. It's stronger, it's faster to install, eliminates tire screech, and offers double the warranty.
Â
Traditional traffic membrane systems break down because the sand aggregate penetrates the soft polyurethane membrane layers. The Splatter Coat system uses a hard epoxy topcoat with the aggregate encapsulated inside, so it won't penetrate the membrane.Â
Drive on it in hours.
Single Day Install
Water-Catalyzed Membranes with PATENTED TDI-FREE Technology,
Self Leveling Base Membranes
Low V.O.C.
Low Oder & Low Volatile Organic Compound (V.O.C.) Products Meeting Stringent Regulations
UV RatedÂ
UV Protection ensures the integrity of the system by preventing deterioration caused by UV exposure
The Splatter Coat traffic membrane system consists of a two-component, fast-setting, rapid-curing, solvent-free urethane-elastomer basecoat. It can be applied to green concrete at any thickness without gassing.Â
Â
The topcoat consists of a very strong two-component epoxy with the slip-resistant aggregate mixed right in. The topcoat is spray-applied in a uniform splatter and cures within hours. Apply it one day and drive on it the next day. It's ideal for both new construction and re-coat applications.Â
Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.
Poly-Tuff Systems International Waterproofing Systems Division
Enviro-friendly Water Curable Coatings and Waterproofing Systems
' The New Standard in Traffic Membrane Systems 'Â
Poly-Tuff Systems International Waterproofing Systems Division
Enviro-friendly Water Curable Coatings and Waterproofing Systems
.jpg)
